Log Cabins Home Page

Frequently Asked Questions

Installation

The ingenious structure of Lillevilla planed logs allows for quick and easy assembly. The fit is always perfect, the seal tight and strong. Scarfed corners add an elegant finishing touch to your cabin.

Each corner is provided with storm batten or corner bolt depending on the model. Cabins with 28, 34 and 45mm thick walls are provided with corner reinforcements to ensure a very tight wind-proof seal.

The partition strips in the cabins can be
removed e.g. for cleaning and painting

What base do I need?
Will I need planning permission?
What is included with the cabin?
Can I add extra windows and doors?
Are cabins pre-treated?
What timber treatment do you recommend?
Is the wood from a sustainable source?
Do you provide an installation service?
Can you provide additional thermal insulation?

What base do I need?

All cabins require a flat level Base. We recommend a concrete slab. For the smaller models in the range up to and including the Lillevilla 70 model a 4 inch deep concrete base is sufficient. For the larger models such as the Lillevilla 80, Lillevilla 100 and the 110 a 6 inch deep reinforced concrete base should be utilised.

Will I need planning permission?

Planning permission is not required for our smaller cabins providing that they are under four metres in height and that the cabins is 5 metres from rear wall of you house and it does not take up more than half your garden area that includes any other sheds/greenhouses also. If you are on a corner plot the cabin can not go past the line of the house any nearer the road than the house without planning permission.

For our larger cottages such as the Lillevilla 100/110, Robjohns 34 and the lodge house you will probably need planning permission as they are above 4 metres in height.

A significant amount of planning authorities regard timber buildings as having a low impact on the environment. It is always wise to check with your local authority (especially if you live in a conservation area or live in a listed building).

What is included with the cabin?

• Doors and windows all pre hung and glazed.
• All nails screws, fixings, handles and door lock.
• Roofing felt (unless you have gone for the felt shingles).
• Pre assembled gables.
• Pressure treated bearers.
• Detailed instructions (with access to telephone helpline if required).
• Free delivery to UK mainland addresses

Can I add extra windows and doors?

Extra windows and doors can be added at the time of ordering, they will however need to be cut into the building during installation.

Are cabins pre-treated?

Lillevilla and Luoman cabins are not pre-treated due to the nature of their construction and therefore need to be treated within 2 weeks of installation. We recommend treating both the inside and outside, as well as applying silicone in the outside corner joints for extra protection.

What timber treatment do you recommend?

We recommend Sikkens Cetol Novatech. It provides increased coating flexibility, superior absorption and protection plus greater durability to withstand the natural movement of the timber. It is available in 8 shades and can be supplied with the building if required.

Is the wood from a sustainable source?

Yes, they also have a certification from the Pan European Forestry Council (PEFC). Waste wood is made into heating fuel pellets.

Do you provide an installation service?

Yes, we can provide an installation service if required. However, 80% of people who buy a Lillevilla cabin erect it themselves - it is easy to do!

Can you provide additional thermal insulation?

Yes, we can supply a foil backed insulation board to go underneath the tongue and groove wooden floor, between the floor bearers. We can also provide roof insulation.